Nonintrusive data-based learning of a switched control heating system using POD,DMD and ANN

The aim of this work is to derive an accurate model of two-dimensional switched control heating system from data generated by a Finite Element solver. The nonintrusive approach should be able to capture both temperature fields, dynamics and the underlying switching control rule. To achieve this goal, the algorithm proposed in this paper will make use of three main ingredients: proper orthogonal decomposition (POD), dynamic mode decomposition (DMD) and artificial neural networks (ANN). Some numerical results will be presented and compared to the high-fidelity numerical solutions to demonstrate the capability of the method to reproduce the dynamics.     

砂土串囊式充气锚杆承载力的研究

在砂土地层中,串囊式充气锚杆的研究还比较少,其承载特性及受力机理尚不明确。本文基于莫尔-库仑模型和Vesic圆孔扩张理论法,分别对圆柱体、球体、组合体、椭球体假设下的串囊式充气锚杆的扩大段进行计算分析。并将计算结果与试验得到的实测值进行对比。结果表明:四种形状假设中椭球体的形状假设理论值与实测值的误差最小,仅为8.35%。通过拟合试验数据,并引入与端阻力和侧摩阻力有关的两个系数对承载力公式进行修正,得到了抗拔承载力的经验公式。     

Modifying the physicochemical properties,solubility and foaming capacity of milk proteins by ultrasound-assisted alkaline pH-shifting treatment

This study investigated the effects of different treatment of alkaline pH-shifting on milk protein concentrate (MPC), micellar casein concentrate (MCC) and whey protein isolate (WPI) assisted by the same ultrasound conditions, including changes in the physicochemical properties, solubility and foaming capacity. The solubility of milk proteins had a significant increase with gradual enhancement of ultrasound-assisted alkaline pH-shifting (p < 0.05), especially for MCC up to 99.50 %. Also, treatment made a significant decline in the particle size of MPC and MCC, as well as the turbidity of the proteins (p < 0.05). The foaming capacity of MPC, MCC, and WPI was all improved, especially at pH 11, and at this pH, the milk protein also showed the highest surface hydrophobicity. The best foaming capacity at pH 11 was the result of the combined effect of particle size, potential, protein conformation, solubility, and surface hydrophobicity. In conclusion, ultrasound-assisted pH-shifting treatment was found to be effective in improving the physicochemical properties and solubility and foaming capacity of milk proteins, especially MCC, with promising application prospect in food industry.     

区域小微企业群体大规模客户化制造系统模块化组建研究

为提升组建效率,降低组建难度与成本,在分析区域小微企业及其群体特点的基础上,提出由小微企业构建产品制造模块,通过模块的组合,形成大规模客户化制造系统的模块化组建方法.同时,结合对产品制造模块及其构建方式,以及模块选择主要影响因素的分析,研究了基于模块选择系数的制造模块选择策略,为制造系统的模块化组建提供了必要条件.     

Reduced Graphene‐Wrapped MnO2 Nanowires Self‐Inserted with Co3O4 Nanocages: Remarkable Enhanced Performances for Lithium‐Ion Anode Applications

A simple synthetic approach for graphene‐templated nanostructured MnO₂ nanowires self‐inserted with Co₃O₄ nanocages is proposed in this work. The Co₃O₄ nanocages were penetrated in situ by MnO₂ nanowires. As an anode, the as‐obtained MnO₂–Co₃O₄–RGO composite exhibits remarkable enhanced performance compared with the MnO₂–RGO and Co₃O₄–RGO samples. The MnO₂–Co₃O₄–RGO electrode delivers a reversible capacity of up to 577.4 mA h g^?1 after 400 cycles at 500 mA g^?1 and the Coulombic efficiency of MnO₂–Co₃O₄–RGO is about 96 %.     

Addition of SiO2 to the operation of a polyimide cathode in a sodium battery

The effect of the addition of SiO₂ nanoparticles on the properties of a polyimide cathode was explored by CV, XPS, and galvanostatic cycling methods. The capacity and average cycling potential of the cell increased in the presence of SiO₂. By quantum chemical modeling, it was shown that SiO₂ nanoparticles served as a framework for polyimide, which retained its fixed structure upon metalation with sodium.     

过渡金属Co2+离子掺杂ZnS硫化物纳米晶制备与中红外发光特性研究

利用不含有机相的简单水热法制备了Co^2+∶ZnS纳米晶,纳米晶具有立方闪锌矿结构,平均晶粒尺寸约为8.3 nm,在808 nm激光泵浦下具有2~5μm波段的中红外荧光发射,中心波长位于3400 nm和4700 nm,分别对应Co^2+离子的4T2(F)→4 A 1(F)和4T1(F)→4T2(F)的能级跃迁.进一步将制备的纳米晶在还原气氛下进行800℃热处理,获得立方闪锌矿和纤锌矿混合晶型的纳米晶,平均晶粒尺寸增大到22.5 nm左右,热处理后的纳米晶表面羟基含量更低,中红外荧光发射强度显著提高.该Co^2+∶ZnS纳米晶的制备方法简单、在制备过程中不引入有机相等荧光淬灭中心,同时证明通过后热处理过程可以进一步减少表面缺陷及羟基含量,使荧光强度得到大幅提升.     

输电铁塔四地脚螺栓塔脚板抗拉承载力试验与计算方法研究

针对架空输电线路铁塔中常用的四地脚螺栓塔脚板进行了抗拉承载力试验和理论计算方法研究。首先,选取8个试件进行塔脚板抗拉承载力试验研究,分析塔脚底板板厚及有无加劲板对塔脚板抗拉承载力的影响;其次,通过有限元模拟塔脚板的应力分布情况,并结合“塑性分析,弹性设计”的思想,提出了一种基于屈服线理论的四地脚螺栓塔脚板抗拉承载力计算公式;最后,与试验结果、有限元仿真结果、已有技术规定中的计算结果进行了对比。结果表明:建议公式与试验结果和仿真结果较为吻合,相关技术规定中的计算结果偏于保守,验证了本文建议公式的精确性;底板厚度和加劲板的作用对塔脚板承载力影响较大。研究结果可为输电铁塔四地脚螺栓塔脚板结构设计提供参考。